The sun control film offers optimal protection against heat, sun glare and UV radiation with a clear view to the outside. It adheres static on window panes on the room side without glue. It can easily be exchanged and reused at any time. With 56% the film performs very well in reducing unpleasant heat development in the room. The result is a pleasantly cool interior. The energy consumption for air conditioning units can effectively be reduced after the film has been applied: A large part of the solar radiation energy is filtered out, the energy consumption for existing air conditioning systems is reduced – without having to replace the existing glazing.

Adhesion of the static foil without glue

The static foil scores with its design in classic silver look. The simple use of the film is done without glue. The electrostatic characteristics of the static lamination ensure smooth adhesion to the window pane. The electrostatic film provides a great privacy protection in minutes. The simple application will inspire you.

Technical and optical details

*All values are manufacturer’s values and apply to single glazing

Unique privacy protection for window panes

✔ High quality sun control coating for easy interior use on plane glass panes.

✔ Ideally suited for windows, shower walls, glass doors and partition systems.

✔ Suitable for living rooms, kindergartens, medical practices, shop windows and offices.

The static film is reusable at any time

The electrostatic film can be removed, wound on a roll, stored and reused at any time. Before reattaching the static laminate, simply rinse the laminate with plenty of water and liquid soap (removes possible dust) and reattach it as described below.

Very simple installation of the static film

Just order the electrostatic film in the desired width as running meter. Then simply cut it to the desired size with scissors or a cutter. Thoroughly clean the window or glass surface. Then spray it with a little water. Remove the protective layer on the back. Then apply the sandblast optic film to the glass surface. Squeeze it blister-free with a squeezer beginning at the foil center. Dry it in the end, ready.

The sun control film E-lite 70 transparent is self-adhesive and is installed on the interior window side. It combines a clear view with effective heat protection. Listed buildings in particular can benefit from an unchanged building appearance due to their neutral appearance. The neutral high-performance film ensures maximum daylight and minimal heat development. The innovative solar control ensures that rooms do not heat up uncomfortably in summer. The room temperature becomes comfortable and well-tempered. Energy consumption and running costs for air conditioning in air-conditioned offices, hotels and conference centers can be permanently reduced. The energy efficiency of the installed window glazing is sustainably improved.

PRESTIGE-promising solar control for interior installation

✔ The guarantee for the clear solar control on the window is an effective nanoparticle technology without metal.

✔ A highly effective combination of successive filter layers according to the actual modern production standards.

✔ The product is therefore a first-class alternative to most interior installation PRESTIGE window films on the market.

✔ The metal-free structure of the film ensures fewer reflections, undisturbed mobile phone reception and no corrosion.

All technical and optical details at a glance

*All values are manufacturer values and apply to single glazing

Retrofitting the window film in a few steps

The bubble-free retrofitting of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be coated and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.

The sun control film Titan 50 light exterior is self-adhesive and is installed on the exterior window side. It ensures that heat build-up at the window is reduced by 49% while maintaining a clear view of the outside. This improves living comfort and indoor climate. The light titanium color also ensures that plenty of daylight enters the room. The sun control film is therefore ideal for rooms that need to remain bright. Another advantage is the dual-reflective properties of the film material. It is reflective on the outside and neutral on the inside, preventing annoying light reflections inside the room.

The high-quality film has an extremely scratch-resistant surface with a nano-coating. Due to its extreme UV resistance, the film is ideal for outdoor installation. The sun protection film is weather-resistant, easy to clean, and completely maintenance-free.

Saving electricity and energy with air conditionings

✔ The improved room temperature permanently reduces energy costs and electricity consumption for air conditionings.

✔ It ensures ideal working and production conditions for people and machines in residential and commercial areas.

✔ The flat glass film thus meets the highest standards of aesthetics, appearance, and efficiency for windows.

Technical and optical characterisitcs

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

The sun control film has a durability of 10 years or more when used outdoors on vertical glazing (normal Central European climate). When installed to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of the long durability, a manufacturer’s guarantee of 4 years for vertical and 2 years for inclined glass surfaces is granted. The guarantee applies to peeling, yellowing and demetallization of the high-performance film if the edges of the film are sealed all around with silicone.

Application of the window film in just a few steps

The window film is installed without bubbles using the so-called wet adhesive process. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The sun control film Titan 35 medium exterior is self-adhesive and is installed on the exterior window side. It has a transparent tint in a medium titanium color, ensuring a pleasant level of daylight transmission. While providing a permanently clear view to the outside, it blocks 57% of unpleasant heat on the outside. The flat glass film thus offers a very good compromise between sun control and daylight.

Another advantage of the high-performance film is the integrated glare reduction, which protects the room from bright sunlight. Eye strain when watching TV or working on a PC, laptop, or monitor is now a thing of the past. The surface of the heat rejection film is scratch-resistant and finished with a high-quality nano-coating for easy cleaning. The long durability of the high-quality film guarantees long-term sun protection for windows and glass panes.

Dual reflective for an inconspicuous interior view

✔ The Titan 35 model is a dual reflective high-performance film with reduced external and low internal light reflections.

✔ The titanium color ensures a pleasantly inconspicuous appearance when viewed to the outside and preserves the ambience.

✔ The flat glass film ensures a modern external appearance of the building with a reduced reflection effect.

Sun protection ensures improved energy efficiency

The self-adhesive sun control film is weather-resistant and therefore suitable for outdoor installation. It has a very good heat control value of 57% and provides 99% UV protection. The interior is protected against premature fading caused by sunlight. Interior spaces are kept pleasantly cool and heat build-up in the building is efficiently reduced. Energy and electricity consumption for air conditioning systems can be permanently reduced. The energy efficiency of the installed window glazing is sustainably increased.

Technical and optical film characetristics

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

The sun control film has a durability of 10 years or more when used outdoors on vertical glazing (normal Central European climate). When attached to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of the long durability, a manufacturer’s guarantee of 5 years for vertical and 3 years for inclined glass surfaces is granted (in the fifth year 30% of the film value). The guarantee applies to peeling, yellowing and demetallization of the high-performance film if the edges of the film are sealed all around with silicone.

Retrofitting the window film in just a few steps

The bubble-free retrofitting of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the window pane to be coated and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The sun control film Titan 20 mirrored exterior is self-adhesive and is installed on the exterior window side. It has a transparent color in dark titanium. It is therefore particularly suitable for window panes that face south. The brightness on this side of the building ensures that the loss of light caused by the sun control film can be compensated very well. This ensures a sufficiently high level of daylight permeability.

Dual-reflective properties characterize this film. It offers a neutral appearance on the room side without annoying light reflections. On the outside, the highly mirrored look provides elegant privacy protection. No visibility is possible in daylight. A permanent clear view of the outside is ensured from the inside. The strong visual appearance ensures an attractive appearance of the entire building.

Strong exterior reflection for maximum performance

The weather-resistant heat protection film is attached to the outside of window panes. The highly reflective surface is a prerequisite for 69% heat rejection on windows and glass panes. The environment inside the room is kept pleasantly cool, comfortable and glare-free. Living comfort and indoor climate are sustainably improved.

The cooled interior reduces energy and power consumption for cooling systems on warm summer days. The wear and tear on ventilation and air conditioning systems can be noticeably reduced. The reduced electricity consumption improves the environmental balance of the building. The heat protection film therefore meets the highest standards of efficiency and energy saving. It is recommended for use in both residential and commercial premises.

Nano coating for long life & easy cleaning

The sun control film was developed in test laboratories using the latest state-of-the-art technology. The sun protection for windows is surface-hardened and equipped with a highly effective nano-coating. It is therefore easy to clean with conventional glass cleaning products and has a long service life.

Technical and optical characteristics

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

The sun control film has a durability of 10 years or more when used outdoors on vertical glazing (normal Central European climate). When attached to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of the long durability, a manufacturer’s guarantee of 5 years for vertical and 3 years for inclined glass surfaces is granted (in the fifth year 30% of the film value). The guarantee applies to peeling, yellowing and demetallization of the high-performance film if the edges of the film are sealed all around with silicone.

Application of the window film in just a few steps

The window film is installed without bubbles using the so-called wet adhesive process. Thoroughly clean the surface to be glued and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The sun control film DSS 330 Silver medium exterior is self-adhesive and is installed to the exterior side of window panes. Compared to the film model DSS 220, it has a reduced mirror effect on the outside. When viewed from the inside – with a permanent clear view of the outside – a tint in medium silver grey of the window film is noticeable.  The daylight permeability is pleasantly high. In bright sunlight, annoying sun glare is reduced by 63%. The DSS 330 model offers a very good compromise between heat protection and daylight for use in residential and commercial buildings.

Combines energy efficiency and living comfort

With 66% heat protection, sunlight on the window is pleasantly reduced. The result is a permanently cool interior atmosphere that meets the highest standards of living comfort and indoor climate. The energy efficiency of the installed window glazing is sustainably increased through retrofitting. Energy and electricity costs for air conditioning and ventilation systems can be saved permanently as a result of the lower utilization. This has a positive effect on the building’s CO² emissions and protects the environment.

Resistant to external weather influences

The well-tempered solar flat glass film was developed specifically for exterior installation: It is permanently resistant to external weather influences and has a scratch-resistant surface. This enables simple and easy cleaning with water and conventional glass cleaning agents.

Technical and optical characteristics

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

The model DSS 330 has a durability of 10 years or more when used on vertical exterior glazing (normal Central European climate). When installed to slanted exterior glazing, the durability is reduced accordingly due to the higher environmental impact.

Regardless of durability a manufacturer’s guarantee of 7 years for vertical and 4 years for inclined glass surfaces is granted. The guarantee applies to peeling, yellowing and demetallization when the edges of the film are sealed with silicone.

Retrofitting the window film in a few steps

The bubble-free retrofitting of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be glued and spray it with some installation fluid. Peel off the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe it dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just buy the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2,5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The sun control film DSS 220 silver mirrored exterior is self-adhesive and is installed to the exterior side of window panes. It has a transparent color in a dark silver grey tint. The high-performance film is particularly suitable for window panes that are located on the south side of the house. The brightness on this side of the building ideally compensates for the loss of light caused by the sun control film. This ensures a sufficiently high level of daylight permeability.

The mirror effect also provide elegant privacy protection. It is not possible to see from outside in daylight. A permanent clear view of the outside is ensured from the inside.

Mirrored sun control for maximum efficiency

The mirrored appearance ensures maximum rejection of heat, sun glare and UV rays. Once installed, the room temperatures can be permanently reduced. The guarantee for the improved indoor climate is 81% rejected solar energy. Air conditioning systems reach the preferred temperature in even less time, they run less often and for less time. The improved energy efficiency of the window panes leads to reduced heat development in the building. In this way, energy consumption and electricity costs for air conditioning systems can be saved permanently.

Best-selling solar control film for exterior use

The flat glass film is permanently weather-resistant and therefore ideal for exterior installation. The scratch-resistant surface is a prerequisite for easy cleaning with conventional glass cleaning products. Furthermore, the innovative sun protection for windows is completely user-free and maintenance-free. Its excellent workmanship makes this window film one of the best-selling solar control films for exterior use.

Technical and optical characteristics

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

The coating has a durability of 10 years or more when installed on vertical glass panes (normal Central European climate). When coated to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of durability, the DSS 220 comes with a manufacturer’s guarantee of 7 years for vertical and 4 years for inclined glass surfaces. The guarantee refers to peeling, yellowing and demetallization when the edges of the film are sealed with silicone.

Installation of the window film in a few steps

The window film is installed without bubbles using the so-called wet adhesive process. Clean the surface to be coated and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2,5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free

The sun control film IB 210 Bronze mirrored is self-adhesive and is installed to the interior window side. Heat development is permanently reduced by strong 81%. This noticeably improves the indoor climate. Existing energy and electricity costs for operating air conditioning systems can be reduced in this way. The energy efficiency of the installed window glazing is sustainably increased.

The dark bronze color is ideal for buildings with south-facing windows. The brightness on this side of the building compensates the loss of light caused by the solar coating. This ensures a sufficiently high level of daylight permeability. The reflective heat reduction combines high performance with cost-effectiveness and meets all requirements for solving demanding solar protection projects.

Sun control with an elegant visual statement

✔ When viewed from the outside, the sun control film has a strong mirror effect during the day. It is not possible to see inside from outside, heat reduction and privacy are ideally combined.

✔ When viewed from the inside, an elegant dark bronze tint of the coated glass surface is noticeable. The flat glass film still provides the interior with a very pleasant daylight atmosphere.

✔ The surface of the self-adhesive heat protection film is finished with a scratch-resistant protective layer, which makes it easy to clean with conventional glass cleaning agents.

Technical and optical detail informations

*All values are manufacturer values and apply to single-pane glazing

Retrofitting the window film in a few steps

The bubble-free retrofitting of the window film is done using the so-called wet adhesive process. Thoroughly clean the surface to be coated and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.

The sun control film cold steel 35 medium grey is self-adhesive and is installed on the interior window side. It effectively reduces unpleasant heat development by 55%. The medium grey color ensures that the room is flooded with enough daylight. The reduced sun glare enables a permanently clear panoramic view of the outside without annoying light reflections. Due to the effective rejection of solar energy, the room temperature can be noticeably improved. Energy and electricity costs for building air conditioning can be reduced permanently. The energy efficiency of the installed window panes is sustainably improved.

The heat control film is self-adhesive and is installed to window panes on the room side (internal installation). It is manufactured to a high quality, scratch-resistant and has a long service life. Premature fading and sun damage to furniture and seating sets, which can occur when exposed to direct sunlight, are prevented due to an efficient UV block.

Neutral design – natural view & little reflection

✔ According to a U.S. Patented process placed particular emphasis on the neutral coloring of the Cold Steel 35.

✔ When viewed from the inside, the panoramic film surprises with its very natural-looking medium grey color.

✔ The weak reflection of the sun protection film makes a discreet overall appearance possible – inside and outside.

Technical and optical detail informations

*All values are manufacturer values and apply to single-pane glazing

Installation of the window film in a few steps

The bubble-free installation of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be coated and spray it with some installation fluid. Peel off the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe it dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.

The privacy film RSM 220 silver mirrored exterior is self-adhesive is subsequently installed to the exterior side of window panes. It provides elegant privacy protection day and night. The appearance is matt silver grey when viewed from the inside and mirrored when viewed from the outside. This prevents any visibility. The satin-matt interior of the privacy film ensures a pleasant, reflection-free ambience when light hits.

The privacy film is scratch-resistant, easy to clean and therefore has a very long service life. Even after several years the high-performance film can be removed without leaving any residue thanks to the special adhesive.

The exterior mirror effect ensures high sun control

✔ The privacy film RSM 220 is an exclusive combination of privacy film and sun sontrol film.

✔ The mirror effect on the outside ensures a high level of heat-, glare- and UV protection.

✔ With its daylight permeability, the combination film is suitable for overhead glazing.

Technical and optical detail informations

Material:Weather-resistant polyester film, aluminum-coated

*All values are manufacturer values and apply to single glazing

Installation of the window film in a few steps

The bubble-free installation of the window film is done with the so-called wet adhesive process. Thoroughly clean the surface to be installed and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the glass surface. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just shop the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.