The Window film Total Mirror is a self-adhesive polyester film with a high-gloss mirror effect. It is self-adhesive and is stuck to windows and glass doors. It is therefore ideal for use as a mirror (replacement with mirror-like properties). In just a few steps, large mirror surfaces are created that give rooms visually more depth and brightness.

The adhesive film is of high quality and has a scratch-resistant, high-gloss film surface. It can therefore be easily cleaned at any time with water and conventional glass cleaning products. No additional protection (application tape) is necessary during bonding. The Total Mirror is intended for indoor use.

Ensures beautiful mirrors without optical distortions

✔ Installing oo windows and glass doors indoors (single-pane glazing, double-pane glazing without thermal insulation).

✔ Thanks to the very high metal density, the window film transforms glass into a beautiful mirror without optical distortions.

✔ Once installed, the mirror film is an impressive small and large design element for exclusive interior room design.

✔ Application areas for the mirror effect film are windows and glass doors in architecture and interior design.

Technical and optical characterisitcs

*All values are manufacturer values and apply to single glazing

The installation is done in a few steps

The Window film Total Mirror is installed using the so called wet installation method. Clean the surface to be coated thoroughly so that it is free of dust, grease and dirt. Spray the cleaned surface with some installation fluid (release and lubricant). Remove the protective film on the back, spray the adhesive side and apply to the glass surface. Smooth everything out using a squeegee starting from the middle without any bubbles and wipe everything dry, done.

Just order the mirror film cheaply online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The Spy mirror film Silver mirrored Interior is self-adhesive and is installed to the interior side of the window. It is highly reflective on one side and transparent silver-grey on the other side. The mirror finish provides elegant privacy protection, while the transparency allows one-way visibility without being seen oneself.

The spy mirror effect works on the darker side (observation room – visibility possible) and on the brighter side (interrogation room – no visibility possible). The same happens with window panes in buildings when it is darker inside the building than outside during the day. In this case, it is possible to see out of the building, but not in the bulding.

If the lighting conditions are reversed because it gets dark outside in the evening and the lights are turned on inside, the spy mirror effect is also reversed. The reversal can be prevented by additional light, e.g., by externally mounted street lighting, spotlights, or floodlights.

On top: Improved indoor climate as side effect

Living comfort and indoor climate in buildings are noticeably improved after installing the one-way mirror film. The strong mirror effect during the day provides noticeable heat rejection and an expressive appearance. The scratch-resistant surface ensures easy cleaning with conventional glass cleaning agents and a long service life. Furthermore, the film is completely maintenance-free. Its outstanding properties make this window film the best-selling one-way mirror film for interior installation.

Technical and optical film characteristics

*All values are manufacturer’s values and apply to single-pane glazing

Installation of the window film in a few steps

The bubble-free application of the Spy mirror film Silver mirrored Interior is quick and easy using the wet adhesive method. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film from the back, spray the adhesive side and apply it to the glass surface. Use a squeegee to smooth everything out from the center without leaving bubbles and wipe dry. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The Spy mirror film Bronze mirrored Exterior is self-adhesive and is installed to the exterior side of window panes. The window film is highly reflective on one side and has a transparent bronze tone on the other. The reflective surface provides elegant privacy protection, while the transparency allows one-way visibility without being seen.

This spy mirror effect works on the darker side (observation room – visibility possible) and on the lighter side (interrogation room – no visibility possible). It also works on window panes in buildings when it is darker inside the building than outside during the day. Then you can see out of the building, but not in.

If the lighting conditions are reversed because it gets dark outside in the evening and the lights are turned on inside, the spy mirror effect is also reversed. The reversal can be prevented by additional lighting, e.g., by externally mounted street lighting, spotlights, or floodlights.

High-quality window film with integrated heat reduction

The strong mirroring effect of the spy mirror film provides noticeable heat reduction. Living comfort and indoor climate in homes are permanently improved. Air conditioning systems reach the desired temperature in even less time. The power-intensive systems run less frequently and for shorter periods. This results in a sustainable reduction in electricity and maintenance costs. The scratch-resistant surface guarantees easy cleaning with conventional glass cleaning agents. Furthermore, the high-quality film is completely maintenance-free and requires no special handling.

Technical and optical film properties

*All values are manufacturer values and apply to single glazing

Installation of the window film in a few steps

The bubble-free installation of the Spy mirror film Bronze mirrored Exterior is quick and easy using the wet adhesive method. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film from the back, spray the adhesive side and apply it to the glass surface. Use a squeegee to smooth everything out from the center without leaving bubbles and wipe dry. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The Spy mirror film Titan mirrored Exterior is self-adhesive and is installed on the exterior window side. Its appearance is highly mirrored on the exterior side. On the interior side, the color is a transparent anthracite. The mirroring provides elegant privacy protection, while the transparency allows one-way visibility without being seen oneself.

The spy mirror effect works on the darker side (observation room – visibility possible) and on the lighter side (interrogation room – no visibility possible). The same applies to window panes in buildings when it is darker inside the building than outside during the day. In this case, it is possible to see out of the building, but not in.

If the lighting conditions are reversed because it gets dark outside in the evening and the lights are turned on inside, the spy mirror effect is also reversed. The reversal can be prevented by additional light, e.g., by externally mounted street lighting, spotlights, or floodlights.

On top: High-quality heat rejection on the window

The strong mirroring effect of the spy mirror film also provides noticeable heat rejection. Living comfort and indoor climate in buildings are permanently improved. Air conditioning systems reach the desired temperature in even less time. They run less frequently and for shorter periods. This results in a sustainable reduction in electricity and maintenance costs. The scratch-resistant surface ensures easy cleaning with conventional glass cleaning agents and a long service life. Furthermore, the film is completely maintenance-free and requires no operation.

Technical and optical film properties

*All values are manufacturer’s values and apply to single glazing

Installation of the window film in a few steps

The bubble-free installation of the Spy mirror film Bronze mirrored Exterior is quick and easy using the wet adhesive method. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film from the back, spray the adhesive side and apply it to the glass surface. Use a squeegee to smooth everything out from the center without leaving bubbles and wipe dry. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The Spy mirror film Gold mirrored Interior is self-adhesive and is installed to the interior side of glass and window panes. It is mirrored on one side and has a transparent gold tone on the other side. The mirroring provides an elegant privacy protection. The transparency provides a one-sided view without being seen oneself.

The spy mirror effect works on the darker side (observation room – visibility possible) and on the brighter side (interrogation room – no visibility possible). The same happens with window panes in buildings when it is darker inside the building than outside during the day. In this case, it is possible to see out of the building, but not in the bulding.

If the lighting conditions are reversed because it gets dark outside in the evening and the lights are turned on inside, the spy mirror effect is also reversed. The reversal can be prevented by additional light, e.g., by externally mounted street lighting, spotlights, or floodlights.

Pleasant heat reduction as additional effect

At the same time, the strong mirroring of the spy mirror film ensures noticeable heat reduction. Living comfort and indoor climate in buildings get permanently improved. Air conditioners reach the preferred temperature in even less time. They run less frequently and less long. Electricity and maintenance costs can be sustainably reduced. The scratch-resistant surface ensures easy cleaning with conventional glass cleaners and a long life. Incidentally, the film is completely user-friendly and maintenance-free.

Technical and optical film characteristics

*All values are manufacturer’s values and apply to single-pane glazing

Installation of the window film in a few steps

The bubble-free application of the Spy mirror film Gold mirrored Interior is quick and easy using the wet adhesive method. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film from the back, spray the adhesive side and apply it to the glass surface. Use a squeegee to smooth everything out from the center without leaving bubbles and wipe dry. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.

The Spy mirror film Silver mirrored Exterior is self-adhesive and is installed to the exterior side of window panes. It has a highly reflective exterior side and a transparent silver-grey interior side. The mirror finish provides elegant privacy protection, while the transparency allows one-way visibility without being seen.

The spy mirror effect works on the darker side (observation room – visibility possible) and on the brighter side (interrogation room – no visibility possible). The same works to window panes in buildings when it is darker inside the building than outside during the day. In this case, it is possible to see out of the building, but not in.

When the lighting conditions change because it gets dark outside in the evening and the lights are turned on inside, the spy mirror effect is also reversed. This reversal can be prevented by additional lighting, e.g., by externally mounted street lighting, spotlights, or floodlights.

Spy mirror with heat rejection as additional effect

The strong mirroring of the spy mirror film also provides noticeable heat rejection. Living comfort and indoor climate in buildings are permanently improved after coating the window pane. Air conditioning systems reach the preferred temperature in even less time. They run less frequently and for shorter periods. Electricity and maintenance costs can be reduced in the long term in this way. The scratch-resistant surface ensures easy cleaning with conventional glass cleaning agents and a long service life. Furthermore, the self-adhesive film is completely maintenance-free and easy to use.

Technical and optical data sheet

*All values are manufacturer’s values and apply to single-pane glazing

Installation of the window film in a few steps

The bubble-free installation of the Spy mirror film Silver mirrored Exterior is quick and easy using the wet adhesive method. Thoroughly clean the surface to be coated and spray it with installation fluid. Remove the protective film from the back, spray the adhesive side and apply it to the glass surface. Use a squeegee to smooth everything out from the center without leaving bubbles and wipe dry. Any white discoloration of the adhesive will disappear within a few days.

Just order the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 3.90 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for installing the film are shipped with each delivery for free.